Home > News > Introduction to Installation of Stainless Steel Handle

Introduction to Installation of Stainless Steel Handle

2023-08-16

At the beginning, a new door lock component with a stainless steel handle was installed, passing through the door next to this hole. The component of the bolt curve of the anti-theft door must guide towards the outside of the door. The door latch is used to quickly stabilize the stainless steel handle kit that comes with the eyepiece.
Next, we entered the outer door handle that protruded from the outside. Generally, it is a cylinder with two sleeves and an internal latch hole, which will be very suitable. Press the door handle firmly until the cover plate is firmly against the door. So we reached inside the door and pulled the handle from the inside. Two stable screws, thread the holes on the cover plate in a clockwise direction to the outer door handle, tighten the screws firmly, and use a cross screwdriver. Finally, orderly follow the curved side of the door frame around the inner side of the door frame, and reliably stabilize the impact plate and screws included in the kit.
The above is the installation of the complete stainless steel handle, and each step is closely connected. Don't take the wrong step carelessly.

Previous: Description of the function of the anti-theft door handle

Next: Circular art metal fireproof door handle